TM 9-2320-365-34-2
6-2. 100 AMP ALTERNATOR REPAIR (CONT)
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush with water
and get immediate medical attention.
Failure to comply may result in injury to
personnel.
(13) Apply sealing compound to threads of three screws (14).
(14) Position rotor (15) on shaft (3) with three washers (16),
lockwashers (17), and screws (14).
(15) Tighten three screws (14) to 45 lb-in. (5 N•m).
(16) Install bearing (18) in end housing (19).
(17) Position
end
housing
(19)
on
stator
(12)
with
matchmarks aligned.
(18) Position nine self-locking nuts (20) on stator (12).
(19) Tighten nine self-locking nuts (20) to 45 lb-in. (5 N•m).
(20) Install six washers (21) and coil leads (22) on front
housing (7) with six nuts (23).
6-8