TM 9-2320-365-34-2
(8) Position boot (18) on link spool (19) to allow access to
plunger (20).
CAUTION
Use care not to damage link spool during
removal.
Failure to comply will result in
damage to equipment.
(9) Wrap three layers of abrasive cloth around plunger (20).
(10) Hold plunger (20) in a fixed position.
(11) Remove link spool (19) from plunger (20).
(12) Remove boot (18) from link spool (19).
(13) Match mark shift housing (17) to drive housing (21).
(14) Remove five screws (22), lockwashers (23), and shift
housing
(17)
from
drive
housing
(21).
Discard
lockwashers.
(15) Remove preformed packing (24) from shift housing (17).
Discard preformed packing.
6-13