TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 298 of 1414

TM 9-2320-365-34-2

6-7. TRANSMISSION EXTERNAL WIRING HARNESS REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-365-10).

Batteries disconnected (TM 9-2320-365-20-3).

Cab raised (TM 9-2320-365-10).

Tools and Special Tools

Wrench, Torque, 0-150 lb-in. (Item 79, Appendix

B)

Tools and Special Tools (Cont)

Goggles, Industrial (Item 25, Appendix B)

Tool Kit, Genl Mech (Item 68, Appendix B)

Wrench Set, Socket (Item 75, Appendix B)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape (Item

29, Appendix C)

Ties, Cable Plastic (Item 87, Appendix C)

Nut, Self-Locking (Item 130, Appendix F)

a. Removal.

NOTE

• Tag connectors and connection points prior to

disconnecting.

• Remove plastic cable ties as required.

(1) Disconnect transmission external harness (1) from

bulkhead receptacle J119 (2).

(2) Disconnect transmission external harness (1) from

throttle position sensor (3).

6-38