TM 9-2320-365-34-2
Change 1
7-3
(3)
Install profile gage bolt in torque converter end
plug (3).
(4)
Remove torque converter end plug (3) from torque
converter module (1).
(5)
Remove profile gage bolt from torque converter
end plug (3).
(6)
Remove retainer packing (4) from torque converter
end plug (3).
Discard retainer packing.
(7) Remove torque converter end plug (4.1) from torque
converter module (1).
(8) Remove retainer packing (4.2) from torque converter
end plug (4.1).
Discard retainer packing.
(9)
Remove screw (5) and shim (6) from torque
converter module (1).
NOTE
Perform steps (7) and (8) on transmission
serial numbers 6510165560 and higher.