TM-9-2320-366-10-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; OPERATOR’S INSTRUCTIONS; VOLUME NO. 2 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-366-10-2 - Page 547 of 930
TM 9-2320-366-10-2
Table 3-2. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
e26.
RIGHT TURN SIGNAL INDICATOR DOES NOT ILLUMINATE (CONT).
(g)
Install PDP cover (para 3-17b).
(h)
If right turn signal indicator still does not illuminate, notify Unit Maintenance.
e27.
TURN SIGNAL INDICATORS AND HIGH BEAMS ON INDICATOR DO NOT ILLUMINATE.
Step 1. Check operation of turn signals and high beams (para 2-18, item 21 and 40).
If turn signals and headlights are OK, notify Unit Maintenance.
e28.
HIGH BEAMS ON INDICATOR DOES NOT ILLUMINATE.
Step 1. Check operation of high beams (para 2-18, item 40).
If high beams do not illuminate, perform Eletrical System Troubleshooting (e39. One Or Both
Headlights High Beams Do Not Illuminate). If high beams illuminate, notify Unit Maintenance.
e29.
PARKING BRAKE INDICATOR AND/OR EMERGENCY BRAKE INDICATOR DOES NOT
ILLUMINATE.
Step 1. Check operation of parking brakes (para 2-18, item 28).
If parking brakes do not operate, perform Brake System Troubleshooting (i8. Parking Brakes Do Not
Apply).
Step 2. Check circuit breaker (CB77) in PDP to see if it is tripped.
(a)
Remove PDP cover (para 3-17a).
(b)
Position main light switch to OFF (para 2-27c).
(c)
If circuit breaker is tripped, push in to reset.
(d)
Position main light switch to SER DRIVE (para 2-27c).
(e)
Check circuit breaker to see if it tripped. If circuit breaker is tripped, notify Unit Maintenance.
(f)
Position main light switch to OFF (para 2-27c).
(g)
Install PDP cover (para 3-17b).
(h)
If parking brake indicator and/or emergency brake indicator still does not illuminate, notify Unit
Maintenance.
e30.
POWER TAKE-OFF (PTO) INDICATOR DOES NOT OPERATE.
Step 1. Check operation of PTO (para 2-65).
If PTO indicator does not work, go to step 2. If PTO is OK, notify Unit Maintenance.
Step 2. Check circuit breaker (CB49) in PDP to see if it is tripped.
Change 1
3-47
Back to Top
