TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1143 of 1824

TM 9-2320-366-20-1

CONTINUITY TEST

CAUTION

Change 1

2-612.17

(1) Disconnect connector P52R from connector

J52.

(2) Set multimeter to ohms.

(3) Connect positive (+) probe of multimeter

to connector P52R socket 4.

(4) Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5) If continuity is not present, repair wire

3094 from terminal lug TL92 to splice E59

(para 2-45) or replace M1089 rear lights

cable assembly (para 7-104).

(6) If continuity is present, repair wire 3094

from splice E59 to terminal lug TL21 (para

2-45) or replace rear lights cable assembly

(para 7-104).

(7) Connect connector J52 to connector P52R.

Inspect connector pins/sockets for damage,

corrosion, and serviceability.

Check that

connector pins are not pushed back and

are capable of making good contact.

NOTE

Use care when testing electrical connectors.

Do not damage connector pins or sockets

with multimeter probes.

Failure to comply

may result in damage to equipment.