TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1229 of 1824

VOLTAGE TEST

WARNING

Change 1

2-675

TM 9-2320-366-20-1

(1) Remove PDP cover (para 16-2).

(2) Remove circuit breaker CB73 from PDP.

(3) Set multimeter to volts DC.

(4) Connect positive (+) probe of multimeter

to PDP, terminal 7, where circuit breaker

CB73 was removed.

(5) Connect negative (-) probe of multimeter to

ground.

(6) Position main light switch to SER DRIVE

(TM 9-2320-366-10-1) and note reading on

multimeter.

(7) If 12 VDC is not present, repair wire 1577

from circuit breaker CB73 terminal 7

to connector PX15 socket J.

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(8) Position main light switch to OFF

(TM 9-2320-366-10-1).

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.