TM-9-2320-366-20-1
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-1 - Page 52 of 1824
TM 9-2320-366-20-1
OVERVIEW (CONT)
•
SUBJECT INDEX.
Lists important subjects contained in volume 3 in alphabetical order and gives the
associated paragraph number.
Volume 4 contains the following major sections in order of appearance:
•
WARNING SUMMARY.
Provides a summary of the most important warnings that apply throughout the
manual.
•
CHAPTER 7, ELECTRICAL SYSTEM MAINTENANCE (CONT)
•
CHAPTER 8, TRANSMISSION MAINTENANCE
•
CHAPTER 9, PROPELLER SHAFT MAINTENANCE
•
CHAPTER 10, FRONT, INTERMEDIATE, AND REAR AXLE MAINTENANCE
•
CHAPTER 11, BRAKE SYSTEM MAINTENANCE
•
CHAPTER 12, WHEEL, TIRES, AND HUBS MAINTENANCE
•
CHAPTER 13, STEERING SYSTEM MAINTENANCE
•
CHAPTER 14, FRAME, TOWING ATTACHMENTS, AND DRAWBARS MAINTENANCE
•
CHAPTER 15, SUSPENSION SYSTEM MAINTENANCE
•
CHAPTER 16, BODY AND CAB MAINTENANCE
•
APPENDIX A, REFERENCES.
Lists publications used with the MTV.
•
APPENDIX B, MAINTENANCE ALLOCATION CHART.
The maintenance allocation chart denotes the level
of maintenance which performs specific maintenance tasks and the time required. It also lists tools and
special tools required for each task.
•
APPENDIX C, TOOLS IDENTIFICATION LIST.
Lists equipment used in the performance of maintenance
and references publications which contain information regarding the equipment.
•
APPENDIX D, EXPENDABLE/DURABLE SUPPLIES AND MATERIALS LIST.
Lists expendable and durable
items used in the performance of maintenance.
•
APPENDIX E, ILLUSTRATED LIST OF MANUFACTURED ITEMS.
Illustrates and describes items that must
be fabricated from bulk materials for repair of the MTV.
•
APPENDIX F, TORQUE LIMITS.
Lists the standard torque values for specific attaching hardware.
•
APPENDIX G, MANDATORY REPLACEMENT PARTS.
•
APPENDIX H, LUBRICATION ORDER.
•
APPENDIX J, ADDITIONAL AUTHORIZATION LIST (AAL).
•
APPENDIX K, TRANSMISSION/TRANSMISSION CONTROLS ADAPTABILITY CHART.
Lists actions
required to mate different transmission configurations with WTEC II or WTEC III controls.
xii
Change 1
Back to Top
