TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 957 of 1824

CONTINUITY TEST

Change 1

2-604.25

TM 9-2320-366-20-1

(8) Install lockwasher, terminal lug TL32,

lockwasher, and nut on RH rear marker

light screw.

(9) Install lockwasher, terminal lug TL31,

lockwasher, and nut on middle rear marker

light screw.

(1) Remove nut, lockwasher, terminal lug TL31

and lockwasher from middle rear marker

light screw.

Discard lockwashers.

(2) Remove nut, lockwasher, terminal lug TL32

and lockwasher from RH rear marker light

screw.

Discard lockwashers.

(3) Set multimeter to ohms.

(4) Connect positive (+) probe of multimeter to

terminal lug TL31.

(5) Connect negative (-) probe of multimeter to

terminal lug TL32 and note reading on

multimeter.

(6) If continuity is not present, repair wire

3094 from terminal lug TL31 to terminal lug

TL32 (para 2-45) and go to step 9 of this

fault if required or replace rear lights cable

assembly (para 7-84) and go to step 1 of

this fault.

(7) If continuity is present, replace middle rear

marker light (para 7-38) and go to step 9 of

this fault if required.