TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 961 of 1824

CONTINUITY TEST

Change 1

2-604.29

TM 9-2320-366-20-1

(1)

Remove nut, lockwasher, terminal lug TL16

and lockwasher from LH rear marker light

screw.

Discard lockwashers.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

terminal lug TL16.

(4)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5)

If continuity is not present, repair wire 3094

from terminal lug TL16 to ground

(para 2-45) and go to step 5 of this fault or

replace rear lights cable assembly (para 7-84)

and go to step 1 of this fault.

(6)

If continuity is present, repair wire 489 from

splice E15 to splice E16 (para 2-45) and

go to step 5 of this fault if required or

replace rear lights cable assembly

(para 7-84) and go to step 1 of this fault.

(7)

Install lockwasher, terminal lug TL16,

lockwasher, and nut on LH rear marker

light screw.