TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 969 of 1824

Change 1

2-604.37

TM 9-2320-366-20-1

CONTINUITY TEST

(1)

Remove nut, lockwasher, terminal lug TL20

and lockwasher from RH rear marker light

screw.

Discard lockwashers.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

terminal lug TL20.

(4)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5)

If continuity is not present, repair wire 3095

from terminal lug TL20 to terminal lug TL21

(para 2-45) and go step 6 of this fault if

required or replace rear lights cable assembly

(para 7-84) and go to step 1 of this fault.

(6)

If continuity is present, repair wire 489 from

splice E15 to splice E17 (para 2-45) and

go to step 6 of this fault if required or

replace rear lights cable assembly

(para 7-84) and go to step 1 of this fault.

(7)

Install lockwasher, terminal lug TL20,

lockwasher, and nut on RH rear marker

light screw.