TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 318 of 1632
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1194
2-1194
2-1194
2-1194
2-1194
KNOWN INFO
TEST OPTIONS
Continuity Test or
STE/ICE Test #91
REASON FOR QUESTION
4.
If continuity is not present,
remote control box internal
wiring harness is faulty.
If continuity is present,
HOIST UP/DOWN
controller is faulty.
Other crane functions from
remote station OK.
Hoist down solenoid
cable OK.
Hoist down solenoid OK.
External remote control
cable OK.
Remote control cable OK.
POSSIBLE PROBLEMS
Faulty remote control
box internal wiring
harness.
Faulty hoist up/down
controller.
Is continuity present
from remote control box
connector pin G to HOIST
UP/DOWN controller
internal wiring harness
pin 4 and remote control
box connector pin H to
HOIST UP/DOWN
controller internal wiring
harness pin 1?
NO
YES
Repair remote control box
internal wiring harness
(para 7-32).
Replace HOIST UP/DOWN
controller (para 7-32).
e107.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) HOIST DOWN DOES NOT OPERATE FROM
e107.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) HOIST DOWN DOES NOT OPERATE FROM
e107.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) HOIST DOWN DOES NOT OPERATE FROM
e107.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) HOIST DOWN DOES NOT OPERATE FROM
e107.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) HOIST DOWN DOES NOT OPERATE FROM
REMOTE STATION (CONT)
REMOTE STATION (CONT)
REMOTE STATION (CONT)
REMOTE STATION (CONT)
REMOTE STATION (CONT)
Back to Top
