KNOWN INFO
TEST OPTIONS
REASON FOR QUESTION
NO
YES
Continuity Test or
STE/ICE-R Test #91
CAUTION
Read CAUTION
on following page.
Is continuity present from
connector P108 socket 16
to connector P107 socket
g?
Repair wire 2006 from connector P107
socket g to connector P108 socket 16
(para 2-45) or replace M1089 rear lights
cable assembly (para 7-104).
Repair wire 9 from connector J107 to terminal
block TB9 (para 2-45) or replace M1089 control
panel power cable assembly (para 7-109).
If continuity is not present,
wire 2006 is faulty.
If
continuity is present, wire 9
is faulty.
16.
e139. MAIN WINCH LH OR RH SPEED SWITCH DOES NOT OPERATE FROM WRECKER
CONTROL PANEL (CONT)
TM 9-2320-366-20-2
LH and RH winches operate
from wrecker control panel.
Circuit breaker CB50 OK.
STATION SELECTOR switch to
WRECKER CONTROL PANEL.
MODE SELECTOR SWITCH to
NORMAL.
Jumper wires OK.
Auxiliary panel cable assembly
OK.
Dashboard cable assembly OK.
POSSIBLE PROBLEMS
Faulty M1089 control panel
power cable assembly.
Faulty M1089 rear lights cable
assembly.
2-1450.26
Change 1