TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 762 of 1632
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1570
2-1570
2-1570
2-1570
2-1570
YES
NO
KNOWN INFO
WARNING
Read WARNING
on following page.
TEST OPTIONS
Voltage Test or
STE/ICE-R #89
REASON FOR QUESTION
3.
Is 12 vdc present at
connector J913-2?
If 12 vdc is not present,
wire 1674 in dashboard
cable assembly is faulty.
If 12 vdc is present, wire
1674 in auxiliary panel
cable assembly is faulty.
Circuit breaker OK.
Worklights normal
mode OK.
Blackout override
switch OK.
Relay K12 OK.
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty auxiliary panel cable
assembly.
Repair wire 1674 (para 2-45)
or replace WTEC II dashboard cable
assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
Repair wire 1674 (para 2-45)
or replace auxiliary panel
cable assembly (para 7-58).
e151.
M1088/M1089 WORKLIGHTS DO NOT ILLUMINATE IN BLACKOUT MODE WITH BLACKOUT OVER-
e151.
M1088/M1089 WORKLIGHTS DO NOT ILLUMINATE IN BLACKOUT MODE WITH BLACKOUT OVER-
e151.
M1088/M1089 WORKLIGHTS DO NOT ILLUMINATE IN BLACKOUT MODE WITH BLACKOUT OVER-
e151.
M1088/M1089 WORKLIGHTS DO NOT ILLUMINATE IN BLACKOUT MODE WITH BLACKOUT OVER-
e151.
M1088/M1089 WORKLIGHTS DO NOT ILLUMINATE IN BLACKOUT MODE WITH BLACKOUT OVER-
RIDE SWITCH ON (CONT)
RIDE SWITCH ON (CONT)
RIDE SWITCH ON (CONT)
RIDE SWITCH ON (CONT)
RIDE SWITCH ON (CONT)
Back to Top
