TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 1113 of 1396

TM 9-2320-366-20-3

7-79. M1084/M1086 CRANE POWER CONTROL CABLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

Kick panel removed (para 16-3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Ties, Cable, Plastic (Item 69, Appendix D)

Lockwasher (2) (Item 96, Appendix G)

Washer, Spring (2) (Item 289, Appendix G)

Washer, Spring (2) (Item 296, Appendix G)

Nut, Self-Locking (19) (Item 154, Appendix G)

a. Removal.

(1) Disconnect connector P171 (1) from crane junction box

connector (2).

NOTE

• Remove plastic cable ties as required.

• Tag terminal lugs and connection points prior to

disconnecting.

(2) Remove screw (3), terminal lugs TL67 (4), TL17 (5),

TL69 (6), and lockwasher (7) from left taillight carrier (8).

Discard lockwasher.

7-357