TM-9-2320-366-20-3
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-3 - Page 405 of 1396
TM 9-2320-366-20-3
TM 9-2320-366-20-3
TM 9-2320-366-20-3
TM 9-2320-366-20-3
TM 9-2320-366-20-3
2-2393
2-2393
2-2393
2-2393
2-2393
CONTINUITY TEST
CONTINUITY TEST
(1)
Remove 18 screws and cover from base plate.
(2)
Set multimeter to ohms.
(3)
Connect positive (+) probe of multimeter to
power harness connector pin A.
(4)
Connect negative (-) probe of multimeter to
top post of out solenoid and note reading on
multimeter.
(5)
If continuity is not present, replace power
harness (para 20-60).
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
top right post of out solenoid.
(3)
Connect negative (-) probe of multimeter to
bottom right post of out solenoid and note
reading on multimeter.
(4)
If continuity is not present, replace out
solenoid (para 20-60).
Back to Top
