TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 521 of 1396

TM 9-2320-366-20-3

3-6. ENGINE AND TRANSMISSION OIL SAMPLING VALVES REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Cab raised (TM 9-2320-366-10-1).

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Pan, Drain (Item 24, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Wrench Set, Socket (Item 51, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Packing, Preformed (Item 186, Appendix G)

Antiseize Compound (Item 58, Appendix D)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

(1) Position drain pan under transmission oil sampling valve

(1) and engine oil sampling valve (2).

NOTE

Tag hoses and connection points prior to

disconnecting.

(2) Disconnect transmission oil sampling hose (3) from

transmission oil sampling valve (1).

(3) Disconnect engine oil sampling hose (4) from engine oil

sampling valve (2).

(4) Remove nut (5) and transmission oil sampling valve (1)

from bracket (6).

(5) Remove nut (7) and engine oil sampling valve (2) from

bracket (6).

Change 1

3-15