TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 948 of 1396

TM 9-2320-366-20-3

7-33. M1089 TERMINAL BLOCK REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Material/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Nut, Self-Locking (2) (Item 133, Appendix G)

Lockwasher (8) (Item 100, Appendix G)

Nut, Self-Locking (2) (Item 128, Appendix G)

a. Removal.

(1) Remove two self-locking nuts (1), four washers (2), and

two screws (3) from top cover (4). Discard self-locking

nuts.

(2) Remove eight screws (5), lockwashers (6), washers (7),

and top cover (4) from control panel (8).

Discard

lockwashers.

NOTE

• Remove plastic cable ties as required.

• Tag and record wires, terminal block jumpers

and connection points prior to disconnecting.

(3) Loosen screws (9) on top of terminal blocks (10).

(4) Remove wires (11) from top of terminal blocks (10).

(5) Remove five terminal block jumpers (12) from top of

terminal blocks (10).

7-198

Change 1