TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1027 of 1558

TM 9-2320-366-20-4

Change 2

14-97

14-14.

M1088 PLATFORM AND BRACKETS REPLACEMENT/REPAIR (MODIFIED)

This task covers:

a.

Platform Removal

b.

Platform Installation

c.

Platform Disassembly

d.

Platform Assembly

e. Bracket Removal

f.

Bracket Installation

g. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Upper platform removed (para 14-7).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Sling, Cargo (Item 31, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)

Wrench Set, Socket (Item 50, Appendix C)

Material/Parts

Nut, Self-Locking (8) (Item 156, Appendix G)

Nut, Self-Locking (4) (Item 169, Appendix G)

Nut, Self-Locking (7) (Item 154, Appendix G)

Nut, Self-Locking (6) (Item 158, Appendix G)

Personnel Required

(3)

a.

Platform Removal.

(1)

Remove two self-locking nuts (1) and screws (2)

from bracket (3). Discard self-locking nuts.

WARNING

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

NOTE

Left and right side fenders are removed the

same way. Right side shown.