TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1182 of 1558

TM 9-2320-366-20-4

16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT)

NOTE

Step (2) requires the aid of an assistant.

(2) Install engine splash guard (5) on cab (2) with 14

washers (6) and rivets (7).

(3) Lower cab (TM 9-2320-366-10-1).

ae. M1090/M1094 Splash Guard Removal.

NOTE

Right and left splash guards are removed the

same way. Right side shown.

(1) Remove three self-locking nuts (1), screws (2), brace (3),

and splash guard (4) from bracket (5).

Discard self-

locking nuts.

(2) Remove splash guard (4) from brace (3).

NOTE

Perform step (3) on right side bracket.

(3) Remove self-locking nut (6) and screw (7) from bracket

(5). Discard self-locking nut.

(4) Remove two self-locking nuts (8), screws (9), and

bracket (5) from dump body (10). Discard self-locking

nuts.

16-114