TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1186 of 1558

TM 9-2320-366-20-4

16-12. CAB STEP REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Windshield washer reservoir and pump removed (for

left side) (para 18-2).

Cab raised (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Materials/Parts

Nut, Self-Locking (10) (Item 167, Appendix G)

Grommet, Nonmetallic (Item 54, Appendix G)

Receptacle (Item 241, Appendix G)

Seal, Nonmetallic (Item 269, Appendix G)

a. Removal.

NOTE

Left and right cab steps are removed the

same way. Left cab step shown.

(1) Open cab step tread (1) on cab step (2).

(2) Remove four self-locking nuts (3), eight washers (4), and

four screws (5) from cab step (2). Discard self-locking

nuts.

(3) Remove four self-locking nuts (6), eight washers (7), four

screws (8), and cab step (2) from fender (9). Discard

self-locking nuts.

16-118