TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1189 of 1558

TM 9-2320-366-20-4

16-13. CAB FLOOR COVERING AND DOOR SEAL REPLACEMENT

This task covers:

a. Right Cab Floor Covering Removal

b. Right Cab Floor Covering Installation

c. Left Cab Floor Covering Removal

d. Left Cab Floor Covering Installation

e. Center Cab Floor Covering Removal

f.

Center Cab Floor Covering Installation

g. Door Seal Removal (All Models Except M1093/M1094)

h. Door Seal Installation (All Models Except

M1093/M1094)

i.

M1093/M1094 Door Seal Removal

j.

M1093/M1094 Door Seal Installation

k. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Seats removed (For cab floor covering para 16-

15).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 36, Appendix C)

a. Right Cab Floor Covering Removal.

(1) Remove right floor covering (1) from cab floor (2).

(2) Remove four screws (3), washers (4), and molding (5)

from cab floor (2).

b. Right Cab Floor Covering Installation.

(1) Position molding (1) on cab floor (2) with four washers

(3) and screws (4).

(2) Tighten four screws (4) to 22-26 lb-in. (2-3 N·m).

(3) Install right floor covering (5) on cab floor (2).

16-121