TM 9-2320-366-20-4
16-20. M1090/M1094 GUIDE POST ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
a. Removal.
NOTE
Left and right side cable guides are replaced
the same way. Right side shown.
(1) Remove lynch pin (1) from top pin (2).
(2) Remove top pin (2) from guide post (3).
(3) Loosen screw (4).
(4) Remove guide post (3) from dump bed (5).
16-150