TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1222 of 1558

TM 9-2320-366-20-4

16-152

Change 2

16-21.

M1090/M1094 TAILGATE ASSEMBLY REPLACEMENT

This task covers:

a.Removal

b.Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Hinges opened (TM 9-2320-366-10-1).

Tools and Special Tools

Drill, Portable, Electric (Item 7, Appendix C)

Drill, Set, Twist (Item 6, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Tool Kit, Blind Rivet (Item 44, Appendix C)

Tools and Special Tools (Cont)

Tool Kit, Genl Mech (Item 46, Appendix C)

Sling, Cargo (Item 69, Appendix C)

Materials/Parts

Rivet, Blind (2) (Item 246, Appendix G)

Personnel Required

(2)

a. Removal.

(1)

Remove two pins (1) from hitch pins (2).

(2)

Remove two hitch pins (2) from tailgate (3).

(3)

Perform steps (1) and (2) on left side of tailgate (3).

WARNING

Tailgate assembly weighs approximately

270 lbs (123 Kgs).

Attach a suitable

lifting device prior to removal.

Failure to

comply may result in injury to personnel

or damage to equipment.

NOTE

Left and right side pins are removed the

same way.

Right side shown.