TM-9-2320-366-20-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-4 - Page 1225 of 1558
TM 9-2320-366-20-4
16-22. M1090/M1094 LADDER, BRACKETS, AND LATCH REPLACEMENT/REPAIR/
ADJUSTMENT
This task covers:
a. Ladder Disassembly
b. Ladder Assembly
c. Front Bracket Removal
d. Front Bracket Installation
e.
Rear Brackets Removal
f. Rear Brackets Installation
g.
Latch Adjustment
h.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Ladder removed (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix C)
Tool Kit, Blind Rivet (Item 44, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Drill Set, Twist (Item 6, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Sealing Compound (Item 60, Appendix D)
Rivet, Blind (4) (Front Bracket) (Item 247, Appendix G)
Rivet, Blind (2) (Front Bracket) (Item 249, Appendix G)
Materials/Parts (Cont)
Rivet, Blind (3) (Front Bracket) (Item 251,
Appendix G)
Nut, Self-Locking (4) (Front Bracket) (Item 151,
Appendix G)
Rivet, Blind (18) (Ladder) (Item 243, Appendix
G)
Rivet, Blind (2) (Right Rear Bracket) (Item 250,
Appendix G)
Rivet, Blind (2) (Right Rear Bracket) (Item 253,
Appendix G)
Rivet, Blind (4) (Right Rear Bracket) (Item 247,
Appendix G)
Nut, Self-Locking (Right Rear Bracket) (Item
150, Appendix G)
Nut, Self-Locking (4) (Left Rear Bracket) (Item
160, Appendix G)
a. Ladder Disassembly.
WARNING
Wear appropriate eye protection when
removing rivets.
Failure to comply may
result in injury to personnel.
(1) Remove six rivets (1) and two wear pads (2) from ladder
(3).
16-155
Back to Top
