TM 9-2320-366-20-4
(6) Position PTO cable assembly (1) in clamp (10).
(7) Position clamp (10) on frame rail (7) with screw (11) and
self-locking nut (12).
(8) Tighten self-locking nut (12) to 84-108 lb-in. (10-12 N·m).
(9) Position PTO cable assembly (1) in clamp (13).
NOTE
Perform steps (10) through (12) on vehicles
equipped with self-recovery winch.
(10) Connect connector J215 (14) to connector P215 (15).
(11) Connect connector clamp (16) on connector P215 (15).
(12) Position terminal lug TL320 (17) on screw (18).
(13) Position terminal lugs TL111 (19) and TL83 (20), and
clamp (13) on screw (18) with self-locking nut (21).
(14) Tighten self-locking nut (21) to 97-120 lb-in. (11-14 N·m).
7-625