TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 298 of 1558

TM 9-2320-366-20-4

7-630

Change 2

7-129.

REAR INTERVEHICULAR 24 VDC (12 Pin) CABLE REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Materials/Parts

Ties, Cable, Plastic (Item 69, Appendix D)

8, Appendix G).

Lockwashers (4) (Item 112, Appendix G)

a.

Removal.

(1)

Disconnect connector J53 (1) from connector P53R

(2).

(2)

Remove four nuts (3), lockwashers (4), screws (5), and

rear intervehicular 24 vdc cable (6) from vehicle.

Discard self-locking nuts.

b. Installation.

(1)

Install rear intervehicular 24 vdc cable (6) on vehicle

with four screws (5), lockwashers (4), and nuts (3).

(2)

Connect connector J53 (1) to connector P53R (2).

c. Follow-On Maintenance.

Connect batteries (para 7-57).

End of Task.

WARNING

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris.

Failure to

comply may result in injury to personnel

NOTE

•

Note position of cover hinge and cable

key prior to removal.

•

Remove plastic cable ties as required.

NOTE

•

Cover will hinge and cable keying will be

at 9 O’clock position for M1089.

All

other vehicles will hinge and cable

keying will be at 12 O’clock position.

•

Install plastic cable ties as required.