TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 305 of 1558

TM 9-2320-366-20-4

7-131. 100 AMP REVERSE POLARITY RELAY TO POWER DISTRIBUTION (PDP) PANEL

24 VDC CABLE REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

PDP cover removed (para 16-2).

Spare tire lowered (TM 9-2320-366-10-2).

Lower radiator fan shroud removed (para 6-4).

Cab lowered (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Materials/Parts

Ties, Cable, Plastic (Item 69, Appendix D)

Nut, Self-Locking (2) (Item 153, Appendix G)

Lockwasher (Item 96, Appendix G)

Lockwasher (Item 84, Appendix G)

a. Removal.

(1) Remove three screws (1) and washers (2) from PDP (3).

(2) Remove three screws (4) from PDP (3).

(3) Lift PDP (3) outward to gain access.

NOTE

Remove plastic cable ties as required.

(4) Remove screw (5), lockwasher (6), terminal lug TL42 (7),

and four terminal lugs (8) from PDP (3).

Discard

lockwasher.

(5) Position four terminal lugs (8) on PDP (3) with screw (5).

7-637