TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 332 of 1558

TM 9-2320-366-20-4

7-134. STARTER TO SHUNT 24 VDC CABLE REPLACEMENT (CONT)

NOTE

• Both clamps are removed the same way. One

shown.

• Remove plastic cable ties as required.

• Step (2) requires the aid of an assistant.

(2) Remove self-locking nut (5), screw (6), and clamp (7)

from frame rail (8). Discard self-locking nut.

(3) Remove starter to shunt 24 vdc cable (9) from clamp (7).

(4) Perform steps (2) and (3) on remaining clamp.

(5) Remove screw (10), lockwasher (11), and terminal lug

TL45 (12) from lower shunt terminal (13).

Discard

lockwasher.

NOTE

Note routing of starter to shunt 24 vdc cable

prior to removal.

(6) Remove starter to shunt 24 vdc cable (9) from vehicle.

b. Installation.

(1) Position starter to shunt 24 vdc cable (1) on vehicle.

(2) Install terminal lug TL45 (2) on lower shunt terminal (3)

with lockwasher (4) and screw (5).

7-662