TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 338 of 1558

TM 9-2320-366-20-4

7-135. WINCH CONTROL VALVE CABLE ASSEMBLY REPLACEMENT (CONT)

NOTE

• Other hoses, cable assemblies, and terminal

lugs are installed with clamps and winch control

valve cable assembly.

• Steps (7) and (8) require the aid of an assistant.

(7) Position three clamps (11) on winch control valve cable

assembly (1).

(8) Install winch control valve cable assembly (1) on right

frame rail (6) with three clamps (11), screws (12), and

self-locking nuts (13).

(9) Position clamp (14) on winch control valve cable

assembly (1).

(10) Install terminal lug TL320 (15) on screw (16).

(11) DELETED

(12) Install terminal lug TL111 (17) on screw (16).

(13) Position terminal lug TL83 (18) and clamp (14) on screw

(16) with self-locking nut (19).

(14) Tighten self-locking nut (19) to 97-120 lb-in. (11-14 N·m).

7-668

Change 1