TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 335 of 1558

TM 9-2320-366-20-4

7-135. WINCH CONTROL VALVE CABLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Materials/Parts

Ties, Cable, Plastic (Item 69, Appendix D)

Nut, Self-Locking (3) (Item 128, Appendix G)

Nut, Self-Locking (Item 150, Appendix G)

Personnel Required

(2)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

NOTE

Remove plastic cable ties as required.

(1) Disconnect connector J215 (1) from connector P215 (2).

Change 1

7-665