TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 366 of 1558

TM 9-2320-366-20-4

7-139. M1088 INTERMEDIATE INTERVEHICULAR 12 VDC (7 Pin) CABLE

REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Materials/Parts

Ties, Cable, Plastic (Item 69, Appendix D)

Nut, Self-Locking (2) (Item 128, Appendix G)

NOTE

Vehicle serial numbers 0001 through 2359

were not originally equipped with gladhand

selector valves. Vehicle serial numbers 2360

and higher are equipped with gladhand

selector valves.

M1088 without gladhand

selector valves shown.

a. Removal.

NOTE

Remove plastic cable ties as required.

(1) Disconnect connector J52 (1) from connector P52M (2).

(2) Remove two self-locking nuts (3), screws (4), washers

(5), and intermediate intervehicular 12 vdc cable (6) from

mounting bracket (7). Discard self-locking nuts.

7-696

Change 1