TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 373 of 1558

TM 9-2320-366-20-4

7-142. M1089 WINCH CONTROL WIRING HARNESS REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Tool Kit, Electrical (Item 45, Appendix C)

Material/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Lockwasher (8) (Item 100, Appendix G)

Nut, Self-Locking (2) (Item 133, Appendix G)

Splice, Conductor (8) (Item 274.3, Appendix G)

Ties, Plastic, Cable (Item 69, Appendix D)

Tape, Insulation, Electrical (Item 68, Appendix D)

a. Removal.

(1) Remove eight screws (1), lockwashers (2), and washers

(3)

from

control

panel

top

cover

(4).

Discard

lockwashers.

(2) Remove two self-locking nuts (5), four washers (6), two

screws (7), and control panel top cover (4) from

WRECKER CONTROL PANEL (8). Discard self-locking

nuts.

(3) Open LH catwalk (9) and RH catwalk (10) on 30K winch

assembly (11).

Change 1

7-703