TM 9-2320-366-20-4
7-142. M1089 WINCH CONTROL WIRING HARNESS REPLACEMENT (CONT)
NOTE
Tag wires and connection points prior to
disconnecting.
(4) Disconnect two terminal lugs (12) from LH 30K winch
solenoid valve (13).
(5) Disconnect two terminal lugs (14) from RH 30K winch
solenoid valve (15).
NOTE
Cut wires on the solenoid end of conductor
splice.
(6) Remove electrical tape from eight conductor splices (16).
Discard electrical tape.
(7) Cut eight wires (17) from four pneumatic solenoids (18).
7-704
Change 1