TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 457 of 1558

TM 9-2320-366-20-4

Change 2

8-33

8-9.

TRANSMISSION OIL FILTER REPLACEMENT

This task covers:

a.

Removal

b.

Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Container (60 qt (57 L) capacity)

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58,

Appendix C)

Materials/Parts

Oil, Lubricating, OE/HDO 15W40 (Item 44, Appendix D)

Kit, Filter (Item 63, Appendix G)

Screw, Cap (4) (Item 260.1, Appendix G)

a.

Removal.

(1)

Position container under transmission control valve

module (1).

(2)

Remove drain plug (2) from transmission control valve

module (1) and drain oil.

WARNING

CAUTION

•

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

•

Ensure exhaust system is cool before

performing maintenance.

Failure to

comply may result in injury to personnel.

There are two transmission oil filters.

Do not

replace one transmission oil filter without

replacing the other.

Failure to comply may

result in damage to equipment.