TM 9-2320-366-20-4
8-10. TRANSMISSION OIL COOLER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Container (60 qt (57 L) capacity)
Pan, Drain (Item 24, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix B)
Crowfoot Attachment, Socket Wrench (Item
12.1,Appendix B)
Materials/Parts
Antifreeze, Ethylene Glycol, Permanent (Item 12,
Appendix D)
Packing, Preformed (4) (Item 179, Appendix G)
Packing, Preformed (2) (Item 178.1, Appendix G)
Nut, Self-Locking (Item 130.1, Appendix G)
Personnel Required
(2)
WARNING
•
Wear
appropriate
eye
protection
when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
•
Ensure
exhaust
system
is
cool
before
performing maintenance. Failure to comply
may result in injury to personnel.
a. Removal.
(1) Position container under radiator (1).
(2) Remove radiator cap (2) from radiator overflow tank (3).
(3) Open radiator draincock (4) and drain coolant.
(4) Close radiator draincock (4).
Change 1
8-39