TM 9-2320-366-20-4
(7) Position drain pan under transmission (18).
(8) Disconnect transmission auxiliary oil cooler hose (11)
from 90-degree fitting (19).
(9) Remove transmission auxiliary oil cooler hose (11) from
vehicle.
(10) Remove preformed packing (20) from 90-degree fitting
(19). Discard preformed packing.
d. Installation (S/N 7162 and higher).
NOTE
•
Step (1) required the aid of an assistant.
•
Install plastic cable ties as required.
(1) Route transmission auxiliary oil cooler hose (1) on
vehicle.
(2) Install preformed packing (2) on 90-degree fitting (3).
(3) Position transmission auxiliary oil cooler hose (1) to 90-
degree fitting (3).
(4) Tighten transmission auxiliary oil cooler hose (1) to 94-
104 lb-ft (127-141 N·m).
Change 1
8-88.3