TM-9-2320-366-20-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-4 - Page 566 of 1558
TM 9-2320-366-20-4
8-25. TRANSMISSION OIL COOLER HOSES REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Dump body raised (TM 9-2320-366-10-1).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Wrench, Torque 0-200 lb-in. (Item 59, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Crowfoot Attachment, Socket Wrench (Item 12.1,
Appendix B)
Socket Set, Socket Wrench (Item 34, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Cap and Plug Set (Item 15, Appendix D)
Tie, Cable, Plastic (Item 69, Appendix D)
Nut, Self-locking (7) (Item 150, Appendix G)
Packing, Preformed (2) (Item 178.1, Appendix G)
Antiseize Compound (Item 58, Appendix D)
Nut, Self-Locking (4) (Item 162, Appendix G)
Gasket (Item 29.3, Appendix G)
Packing, Preformed (4) (Item 179, Appendix G)
Personnel Required
(2)
WARNING
•
Wear
appropriate
eye
protection
when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
•
Ensure
exhaust
system
is
cool
before
preforming maintenance. Failure to comply
may result in injury to personnel.
a. Removal.
CAUTION
Cap or plug hoses when disconnecting to
prevent contamination of transmission oil.
Failure to comply may result in damage to
equipment.
NOTE
• Tag hoses and connection points prior to
disconnecting.
• Step (1) requires the aid of an assistant.
(1) Remove four self-locking nuts (1), bolts (2), and lower
front support crossmember (3) from vehicle.
Discard
self-locking nuts.
8-126
Change 1
Back to Top
