TM 9-2320-366-20-4
(6) Connect connector PX17 (9) to master power switch
(10).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to
comply
may
result
in
injury
to
personnel.
(7) Apply antiseize compound to threads of stoplight
switches (11 and 12).
(8) Install stoplight switches (11 and 12) in foot control valve
(1).
(9) Install terminal lugs TL155 (13) and TL154 (14) on front
stoplight switch (11) with two lockwashers (15) and nuts
(16).
(10) Install terminal lugs TL153 (17) and TL152 (18) on rear
stoplight switch (12) with two lockwashers (19) and nuts
(20).
Change 1
11-55