TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 687 of 1558

TM 9-2320-366-20-4

11-10. LOAD SENSING VALVE AND CONTROL CABLE REPLACEMENT/ADJUSTMENT

This task covers:

a. Load Sensing Valve Control Cable Removal

b. Load Sensing Valve Control Cable Installation

c. Load Sensing Valve Removal

d.

Load Sensing Valve Installation

e.

Load Sensing Valve Adjustment

f. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Air tanks drained (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

STE/ICE-R (Item 39, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape (Item 20,

Appendix D)

Materials/Parts (Cont)

Antiseize Compound (Item 58, Appendix D)

Adhesive (Item 3, Appendix D)

Tee, Pipe (Item 68.1, Appendix D)

Nut, Self-Locking (2) (Item 167, Appendix G)

References

TM 9-4910-571-12 & P

Personnel Required

(2)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Load Sensing Valve Control Cable Removal.

(1) Loosen jam nut (1) on cable clamp (2).

(2) Loosen screw (3) on cable clamp (2).

(3) Remove load sensing valve control cable (4) from cable

clamp (2).

Change 1

11-57