TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-366-20-4 - Page 864 of 1558

TM 9-2320-366-20-4
12-8
Change 2
12-5.
CENTRAL TIRE INFLATION SYSTEM (CTIS) HOSE ASSEMBLIES, MANIFOLD
VALVE, KNEELING VALVE AND BRACKET REPLACEMENT
This task covers:
a.
Removal
b.
Installation
c.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Air tanks drained (TM 9-2320-366-10-1).
Rim cover removed, if equipped (Para 12-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Fishing Tool, Pneumatic Tire Valve (Item 9,
Appendix C)
Socket, Socket Wrench (Item 70, Appendix B)
Socket, Socket Wrench (Item 37, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench Set, Socket (Item 50, Appendix C)
Tools and Special Tools (Cont)
Adapter, Socket Wrench (Item 2, Appendix B)
Materials/Parts
Sealing Compound (Item 61, Appendix D)
Packing, Preformed (Item 180, Appendix G)
Packing, Preformed (2) (Item 212, Appendix
G)
Packing, Preformed (Item 213, Appendix G)
Seal, Nonmetallic (2) (Item 271, Appendix G)
Filter Element, Fluid (Item 19, Appendix G)
a. Removal.
(1)
Remove valve cap (1) from CTIS manifold valve
(2).
(2)
Remove valve core (3) from CTIS manifold valve
(2) and allow time for tire to deflate.
(3)
Remove banjo bolt (4), CTIS hose (5), and two
seals (6) from hollow wheel stud (7).
Discard
seals.
(4)
Remove nut (8), screw (9), and two seals (6) from
CTIS hose (5).
Discard seals.
WARNING
The sudden release of high pressure air
can cause damage to eyes.
Wear
appropriate eye protection when working
near press-urized air.
Failure to comply
may result in injury to personnel.
NOTE
Perform step (3) if wheel is mounted on
vehicle.
NOTE
Perform step (4) if wheel was removed from
spare tire retainer.


Back to Top