TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 870 of 1558

TM 9-2320-366-20-4

12-14

Change 2

12-5.

CENTRAL TIRE INFLATION SYSTEM (CTIS) HOSE ASSEMBLIES, MANIFOLD

VALVE, KNEELING VALVE AND BRACKET REPLACEMENT (CONT)

(19) Position CTIS hose (17) on hollow wheel stud (18)

with two seals (19) and banjo bolt (20).

(20) Tighten banjo bolt (20) to 22-28 lb-ft (30-38 N

•

m).

(21) Position two seals (19), screw (21), and nut (22) on

CTIS hose (17).

(22) Tighten nut (22) to 22-28 lb-ft (30-38 N

•

m).

(23) Install valve core (23) in CTIS manifold valve (12).

(24) Install valve cap (24) on CTIS manifold valve (12).

c. Follow-On Maintenance.

(1)

Install rim cover, if equipped (Para 12-10).

(2)

Start engine (TM 9-2320-366-10-1) and allow time for

CTIS to inflate tire.

(3) Shut down engine (TM 9-2320-366-10-1).

(4) Check for air leaks around CTIS hoses, CTIS manifold

valve assembly, and kneeling valve or hose adapter.

End of Task.

NOTE

Perform steps (19) and (20) if wheel is

mounted on vehicle.

NOTE

Place a screwdriver behind CTIS hose

assembly while tightening banjo bolt to keep

CTIS hose assembly from contacting wheel

studs.

NOTE

Perform steps (21) and (22) if wheel will be

installed in spare tire retainer.