TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 145 of 1158

TM 9-2320-366-20-5

(7) Position roller bracket (5) and taillight bracket (10) on

mounting bracket (11) with two screws (12) and self-

locking nuts (13).

(8) Position two screws (14) in mounting bracket (11) with

two self-locking nuts (15).

(9) Position two screws (16) in taillight bracket (10) with two

self-locking nuts (17).

(10) Tighten two screws (12) to 149-182 lb-ft (202-247 N·m).

(11) Tighten two self-locking nuts (15) to 149-182 lb-ft (202-

247 N·m).

(12) Tighten two screws (16) to 26-32 lb-ft (35-43 N·m).

NOTE

If

straight

shaft

is

being

replaced,

a

replacement spring pin must be installed.

(13) Apply grease to straight shaft (18) and inside of fairlead

roller (19).

NOTE

Install straight shaft so that lubrication fitting

faces toward bottom.

(14) Install fairlead roller (19) and straight shaft (18) in roller

bracket (5).

17-103