TM-9-2320-366-20-5
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-5 - Page 152 of 1158
TM 9-2320-366-20-5
17-110
Change 2
17-24.
15K SELF-RECOVERY WINCH (SRW) CABLE REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Spelter Socket Removal
c. Spelter Socket Installation
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
15K SRW cable payed-out completely from front of
vehicle (TM 9-2320-366-10-2).
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Gloves, Welder's (Item 14, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Grease, Wire Rope-Exposed Gear (Item 23.1,
Appendix D)
Tools and Special Tools (Cont)
Wire, Nonelectrical (Item 72, Appendix D)
Tape, Duct (Item 67, Appendix D)
Adhesive (Item 10.1 Appendix D)
Spelter Socket Resin (Item 65.3, Appendix D)
Vise, Machinist (Item 48,Appendix C)
Frame, Hand Hacksaw (Item 9.1, Appendix C)
Blade, Hand Hacksaw (Item 3.1, Appendix C)
Personnel Required
(3)
a. Removal.
(1)
Remove cable wedge (1) and 15K SRW cable (2)
from flange (3).
(2)
Pull 15K SRW cable (2) from flange (3).
(3)
Remove 15K SRW cable (2) from drum (4).
WARNING
•
Wear leather gloves at all times when
handling winch cable.
Do not allow
cable to slide through hands even with
gloves on.
Broken wires may cause
injury.
Failure to comply may result in
injury to personnel.
•
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply
may
result
in
injury
to
personnel.
Back to Top
