TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 148 of 1158

TM 9-2320-366-20-5

17-23. 15K SELF-RECOVERY WINCH (SRW) CABLE PULLEYS REPLACEMENT

This task covers:

a. Front Pulley Removal

b. Front Pulley Installation

c. Rear Pulley Removal

d. Rear Pulley Installation

e. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

15K SRW cable extended approximately three feet

(TM 9-2320-366-10-2).

Cab raised (TM 9-2320-366-10-1).

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Tools and Special Tools (Cont)

Hammer, Hand (Item 17, Appendix C)

Gloves, Welder’s (Item 14, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Materials/Parts

Nut, Self-Locking (2) (Item 158, Appendix G)

Nut, Self-Locking (2) (Item 168, Appendix G)

WARNING

Cable can become frayed or contain

broken wires. Frayed or broken wires can

injure hands. Wear heavy leather-palmed

work gloves when handling cable. Failure

to

comply

may

result

in

injury

to

personnel.

a. Front Pulley Removal.

(1) Remove 15K SRW cable (1) from front cable pulley (2).

(2) Remove nut (3), washer (4), and cable pulley (2) from

mounting bracket (5).

(3) Remove two screws (6), self-locking nuts (7), and

brackets (8) from mounting bracket (5).

Discard self-

locking nuts.

17-106