TM 9-2320-366-20-5
Change 2
17-157
17-32.
M1089 30K WINCH VALVE MANIFOLD ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d.
Assembly
e.
Installation
INITIAL SETUP
Equipment Conditions
Disconnect batteries (TM 9-2320-366-20-3).
Air tanks drained (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Heater, Gun Type, Electric (Item 24, Appendix
B)
Materials/Parts
Rag, Wiping (Item 50, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape (Item 20,
Appendix D)
Solder (Item 64, Appendix D)
Insulation, Sleeving, Electrical (Item 29.2 Appendix D)
Nut, Self-Locking (tem 137, Appendix G)
Nut, Self-Locking (Item 133, Appendix G)
Lockwasher (8) (Item 78, Appendix G)
Sealant (Item 55.3, Appendix D)
Personnel Required
(2)
a. Removal.
(1)
Remove two self-locking nuts (1), washers (2),
washers (3), and screws (4) from top cover (5).
Discard self-locking nuts.
(2)
Remove eight screws (6), lockwashers (7), washers
(8), and top cover (5) from control panel (9).
Discard lockwashers.