TM 9-2320-366-20-5
19-11. CAB HYDRAULIC CYLINDER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque 0-600 lb-ft (Item 60, Appendix C)
Wrench Set, Socket (Item 50, Appendix C)
Pan, Drain (Item 24, Appendix C)
Sling, Endless (Item 32, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Cab Support Tool (Item E-4, Appendix E)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Nipple, Tube (Item 33, Appendix D)
Grease, Automotive and Artillery (GAA) (Item 22,
Appendix D)
Hydraulic Fluid A (Item 25, Appendix D)
Packing, Preformed (2) (Item 181, Appendix G)
Packing, Preformed (Item 188, Appendix G)
Nut, Self-Locking (Item 170, Appendix G)
Pin, Cotter (Item 230, Appendix G)
Pin, Cotter (Item 231, Appendix G)
Washer, Spring (Item 286, Appendix G)
Washer, Spring (Item 295, Appendix G)
Personnel Required
(2)
a. Removal.
(1) Place drain pan under cab hydraulic cylinder (1).
WARNING
Hydraulic fluid (MIL-H-5606) is TOXIC.
Wear protective goggles and gloves; use
only in well-ventilated area; avoid contact
with skin, eyes, and clothes.
Skin and
clothing
that
come
in
contact
with
hydraulic
oil
should
be
washed
immediately.
Saturated clothing should
be removed immediately.
Failure to
comply may result in injury to personnel.
NOTE
• Remove plastic cable ties as required.
• Tag hoses and connection points prior to
disconnecting.
(2) Disconnect hoses (2 and 3) from 90-degree fittings (4
and 5).
19-53