TM 9-2320-366-20-5
Change 2
19-59
(10) Install hoses (14 and 15) on 90-degree fittings (2
and 3).
(11) Position cab hydraulic cylinder (4) between cab
frame (16) with cab hydraulic cylinder mounting
bolt (17) and self-locking nut (18).
(12) Tighten self-locking nut (18) to 180-232 lb-ft
244-314 N•m).
CAUTION
NOTE
Install plastic cable ties as required.
Ensure long side of control cam
remains aligned with short slot in
mounting bracket.
Failure to comply
may result in damage to equipment.