TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 381 of 1158

TM 9-2320-366-20-5

19-14. M1089 HYDRAULIC TANK FILTER REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Materials/Parts

Gasket (Item 29, Appendix G)

Filter Element, Fluid (Item 16, Appendix G)

a. Removal.

(1) Remove six screws (1) and washers (2) from filter cover

(3).

(2) Remove filter cover (3) and gasket (4) from hydraulic

tank (5). Discard gasket.

NOTE

Some filters were originally equipped with a

preformed packing. If equipped, remove and

discard preformed packing.

(3) Remove filter (6) from filter cover (3). Discard filter.

b. Installation.

NOTE

If

preformed

packing

is

included

with

replacement filter kit, discard preformed

packing.

(1) Install filter (6) on filter cover (3).

(2) Position gasket (4) and filter cover (3) on hydraulic tank

(5) with six washers (2) and screws (1).

(3) Tighten six screws (1) to 23-25 lb-ft (31-34 N·m).

End of Task.

19-69