TM 9-2320-366-20-5
19-92
Change 2
19-19.
HYDRAULIC RESERVOIR AND BRACKET REPLACEMENT
This task covers:
a.
Removal
b.
Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Hydraulic oil filter assembly removed (para 19-13).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench, Torque 0-600 lb-ft (Item 60, Appendix C)
Socket Set, Socket Wrench (Item 33, Appendix C)
Container (30 gal (113 L) capacity)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Materials/Parts (Cont)
Sealing Compound (Item 57, Appendix D)
Oil, Lubricating, OE/HDO 10W (Item 43,
Appendix D)
Packing, Preformed (2) (Item 185, Appendix G)
Nut, Self-Locking (Item 152, Appendix G)
Nut, Self-Locking (4) (Item 157, Appendix G)
Insulator, Tank (Item 60, Appendix G)
Insulator, Tank (Item 61, Appendix G)
Personnel Required
(2)
a. Removal.
NOTE
(1)
Remove cap (1) from hydraulic reservoir (2).
(2)
Position container under drain plug (3).
(3)
Remove drain plug (3) from hydraulic reservoir (2)
and drain oil.
(4)
Install drain plug (3) in hydraulic reservoir (2).
(5)
Install cap (1) on hydraulic reservoir (2).
CAUTION
Cap or plug hydraulic connections and
connection points to prevent contamination
of hydraulic system.
Failure to comply may
result in damage to equipment.
Tag hoses and connection points prior to
disconnecting.